Language
Home
Fine chemical industry
PROJECT OVERVIEW
The site of the Silla District Biofine Chemical Industry Park is located in Suban Town, Silla District. The planned area is as follows: east to National Highway 235, south to Shuangyong Expressway, west to Fenglinkeng Shuangjiqi Line, and north to the south side of Xiayangkeng Natural Village. The total planned land area is 263.03 hectares (3945 acres). The park focuses on developing low pollution, high-value, high tax, and low risk industries such as biomass green energy chemical, fine chemical, and polymer materials, highlighting three industrial chains: firstly, a relatively complete industrial chain with biodiesel as the leader, biomass fatty alcohols as the middle stream of fine chemical intermediates, and bio based fine chemical products such as propylene glycol and bio ester plasticizers as the terminal; The second is the oil and chemical product industry chain; The third is the industrial chain of chemical new materials products. At the same time, according to the needs of the industrial chain, develop industrial projects that meet the admission requirements of the park.
PROJECT INTRODUCTION
Source of exhaust gas
Sewage station
Exhaust gas volume
30,000m³/h
Composition of exhaust gas
Non methane total hydrocarbons, oxygen-containing compounds, halogenated hydrocarbons, nitrogen-containing compounds, sulfur-containing compounds
Project location
Longyan City, Fujian Province
ECLEAR SOLUTION
Design air volume
30,000m³/h
Design process
YQWT spray washing+YQD biofilter process
Pre washing system
After being collected, the exhaust gas enters the pre-treatment stage through pipelines, and the alkaline/acidic gases in the exhaust gas are neutralized and washed using acid/alkaline solution.
Biological reaction system
The pre-treatment waste gas passes through the packing from the bottom of the bioreactor system from bottom to top, and the foul odor gas is transferred from the gas phase to the water microbial mixed phase, which is decomposed by the microbial metabolism fixed on the filter material.
Exhaust emission system
Choose as needed, consisting of explosion-proof fans and high-altitude discharge pipelines to achieve exhaust gas emission standards and emission heights.
COMPLIANCE REQUIREMENT
| Odor components | Odor inlet indicators | Odor discharge indicators | Exhaust pipe height |
| H2S | ≤100mg/m3 | ≤0.6kg/h | 15m |
| NH3 | ≤40mg/m3 | ≤0.6kg/h | |
| C2H6S | ≤50mg/m3 | ≤0.6kg/h | |
| Odour | ≤3000 | ≤800 |
PROJECT SITE
ADVANTAGES OF ECLEAR
Strength guarantee
More than 20 waste gas treatment technologies developed by the Sino British joint venture team of a national high-tech enterprise
Quality assurance
Stable operation of over 200 project cases without any worries
after-sale service
Having an after-sales team to provide free 24-hour online service
Technical team
The team members have over ten years of experience in exhaust gas treatment, including three registered HVAC engineers, two registered plumbing and drainage engineers, and two construction engineers
Source manufacturer
High cost-effectiveness of equipment engineering helps you better control costs
Environmental compliance
Full process management services make it easy for you to cope with the environmental protection bureau acceptance of meeting the new exhaust emission standards
Eclear Environmental RELATED EQUIPMENT
Spray tower
Spray tower, as a type of environmental waste gas treatment equipment, exists. According to its working principle, it can be divided into circulating water spray tower, alkali spray tower, and acid spray tower (also known as acid washing tower). According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. Spray tower is an important industrial waste gas treatment equipment, whose working principle is to use water and power technology to spray liquid or gas in a mist form into the waste gas, in order to remove harmful substances in the waste gas.
Biological filter
A biological filter is a device that uses effective deodorizing bacteria and a reasonable equipment structure to oxidize and decompose large molecules or structurally complex organic matter into simple inorganic substances such as water and carbon dioxide through differentiation. Eclear Environmental Biological Filter has been improved compared to its peers, adopting an integrated treatment process of pre-treatment and deep adsorption of biological treatment to ensure the stability of the intake during the biological treatment stage. At the same time, deep treatment is not configured at the end, which can ensure that the exhaust gas meets the standard when the emission concentration exceeds the design.
Biological strains
Eclear uses specialized composite bacterial strains, including methane producing bacteria, actinomycetes, Bacillus, yeast, and other bacterial strains, which can target the treatment of odorous components such as hydrogen sulfide, ammonia, and VOCs. Adopting a combination of heterotrophic and autotrophic bacteria, according to the composition of exhaust gas, the microbial composition is reasonably proportioned, taking into account the treatment of organic and inorganic pollutants. Microbial strains have high purity, fast biofilm formation, high activity, and high treatment efficiency, which have significant advantages compared to conventional single strains. Combined with biological enzyme products, it effectively and gently catalyzes the decomposition of pollutants by microorganisms, making their decomposition more targeted and achieving better treatment results for odor pollutants.
Washing tower
Washing tower is a mature waste gas treatment equipment widely used in pre-treatment of industrial waste gas treatment, dust removal, and other aspects. Gas enters the tower and fully contacts, adsorbs, and dissolves with the washing liquid inside the tower, achieving purification effect. The design forms of Yi cleaning towers are diverse, and vertical or horizontal structures can be used according to the project application site. The commonly used materials for washing tower equipment include PP, FRP, and stainless steel. PP and FRP are commonly used in chemical absorption towers and have the characteristics of acid resistance, alkali resistance, and corrosion resistance. Stainless steel materials can be used for high-temperature exhaust gas.
Biological deodorization
Biological deodorization is the process of using effective deodorizing bacteria and a reasonable equipment structure to oxidize and decompose large molecules or structurally complex organic matter into simple inorganic substances such as water and carbon dioxide through differentiation. Eclear Environmental Biological Deodorization has been improved compared to its peers, adopting an integrated process of pre-treatment and deep adsorption of biological treatment to ensure the stability of the intake during the biological treatment stage. At the same time, deep treatment is not configured at the end, which can ensure that the exhaust gas meets the standard emission when the emission concentration exceeds the design emission concentration.
Biofiller
Biofillers commonly used include bamboo charcoal, tree bark, fruit shell carbon, volcanic rock, plastic fillers, ceramic particles, etc. Combined with biological strains and enzyme products, they effectively and gently catalyze the decomposition of pollutants by microorganisms, making their decomposition more targeted and achieving better treatment effects on odor pollutants.
